|
RATTMMOTOR 2.2KW Water Cooled Spindle 110V Spindle Motor 80mm 24000RPM+2.2KW VFD 110V Inverter Variable Frequency Drive+80mm Spindle Mount+80W Water Pump+ER20 Collet for CNC Router Milling Machine - Chang Sheng, GDZ80-2.2
Chang Sheng GDZ80-2.2
-
UPC
785004503381
-
【2.2KW Spindle Motor】: ①This is a 110V-2.2KW water-cooled 15A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise. 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input:1 or 3 phase 110V 0-50Hz/60Hz. Output:3 phase 110V 0-400Hz.Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters). 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor. 【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling. 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required., Weight: 23.1926299624 pounds, Manufacturer: Chang Sheng
|