Engine Model Kit, Hit and Miss Water-Cooled Engine Motor Model, Gasoline Internal Combustion Engine with Base, Educational Toy Electricity Generator - FINER SHOP R18FNEQYO5OAS5015L08U

• Design: The Hit and Miss engine model adopts ancient water cooled structure. It has been installed on the base which is convenient to place and operate. With fuel tank and pipeline, the model is ready to run. Starting Step: 1. Check the engine wiring, connect the oil tank and pipeline when install the battery (ignition voltage: 6-7.4V). 2.Fill the tank with 95 gasolin. Make sure the minimum oil level of the fuel pipe is not lower then that of the carburetor when fixing the fuel tank. Starting Step: 3.Check whether the screws on the model are loose and whether the throttle is closed. Add about 3/4 cold water to the tank after inspection. 4.Turn on the power switch and turn the flywheel. Start the engine counterclockwise on the right side of the engine. Note: 1. Squeeze the air to fill the pipeline with fuel if there is air in the pipeline. 2.Please be careful not to press the accelerator too high before starting. Adjust the accelerator properly to make the model run smoothly after starting. 3.Add 2-3 drops of oil at the carburetor and adjust the accelerator properly if the start is not smooth. Applicable Scope: This is a elaborated internal combustion engine model which is convenient to operate and evokes immersive fun. Its vintage outlook is suitable for model fans to collect and makes ideal gift for holidays. Age: 14+., Manufacturer: FINER SHOP