1170 Pneumatic Thumbtack Gun, Barrel Sleeves for Different Tacks Head Diameter, Comes with Loading Board for Vintage and Antique Furniture (1620 Barrel Sleeve - 41/64'' (16.2mm)) - Kaimsin, K-1170

• 【Barrel Diameter】41/64-inch (16.2mm). Feasible to drive less than or equal to 41/64-inch (16.2mm) head diameter upholstery tack nails 【Material & Clear Model Mark】Made of premium quality stainless steel has magnetic to hold tacks easily. An obvious model mark on the barrel surface gives you the convenience to distinguish 【Easy to Install】Spiral tracks on the barrel interface help to revolve into the deco nailer manually and simply. After installing it by hand, tighten it with a tool to make it firmer 【Driven in Flush】There is a screw nut on the barrel sleeve. It is adjustable for applying a different length of upholstery tacks to drive into the wood flush 【Counterpart】Compatible with Kamsin 1170, Dongya 1170, 1170 pneumatic thumbtack gun. **Please notice that this product just only contains the Model 1620 Barrel Sleeve, the decorative nailer should be purchased separately**
• 【Easy to Start】◈Loading tacks in a plastic loading tray board rather than lay nails one by one on the working surface manually. Load up to 54 pcs one time, the less interruption by loading midway◈Sensitive trigger and lightweight housing eliminate your hand fatigue. Feel no stress while you holding this gun for daily long use. Whether you are proficient in upholstering or refreshing furniture or not, that is easy to start for each one 【Accurate & Efficient Nailing】The inner firing pin and barrel sleeve are magnetic which hold upholstery tacks firmly in place. That's is unnecessary to hold nails with a plier when the tacks go through into the hardwood in straight, flush, and flawless. Just need an air compressor to offer the air power to drive it. Why not get rid of a traditional hammer or plier and use this air gun to finish your work efficiently? 【More Exchangeable Barrel Sleeve Size】Comes with a default barrel sleeve size: 1170. But we also offer other 6 models to fit the upholstery tacks which nail heads are between 9.6mm to 20.3mm. Please refer to the specification figure to choose the corresponding you need. Easy to tear down and give you the flexibility to adjust the nails sinking depth by modifying the screw nut position 【Tacks Range & Application】Acceptable tack head diameter: 9.6mm to 20.3mm (need to replace corresponding barrel sleeve). Application: Attach the fabric, refresh and upholster vintage, antique furniture, and other decoration 【What You Get】All packed in a carton box: Kamsin 1170 Pneumatic Thumbtack Gun×1 PCS, Default 1170 Barrel Sleeve×1 PCS, Nails Loading Tray Board×1 PCS, O-ring Kit×1 PCS, Operation Instruction×1 PCS