RATTMMOTOR CNC Spindle Motor Kit Square 2.2KW 220V Air Cooled Spindle Motor ER20+2.2KW VFD Drive Inventer 220V Spindle Motor Speed Control Variable Frequency Drive Converter for CNC Router Machine - RTM, CFF2.2KW-6

• 【Package Include】: ①1 x 2.2KW Square Air Cooled Spindle Motor ②1 x 2.2KW VFD with cable 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 6A spindle motor come with a ER20 nut and collet. Frequency is 400HZ, precision tapered bore is less than 0.005mm and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle does not support reversal. 【2.2KW VFD】①Technical Parameters - Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3phase 220V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Operation Temperature: -10 ～40℃. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect. ②Multi-Protection Functions - Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection. And many other protection functions, such as over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect. 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number U1, V1, W1. Number U1, V1, W1 port are connected with inverter's port U, V, W respectively., Weight: 16.424438519 Pounds, Manufacturer: RTM