Front and Rear Brake Pad Set Fits for Can-Am Outlander, Parking Brake Pad Shoe Set Semi-Metallic High Temperature Resistance - Yookeep, Brake Pads

• UPC   711731513713
• Suitable for The Following Vehicles: Brake pads fits for Can-Am Outlander L MAX 450 EFI/ L Max DPS 450/ Max 500 DPS/ Max 500 X/ T/ L DPS 500/ L 500 EFI/ L MAX 500 EFI/ 800R EFI XMR/ 1000 XT 2015/ Max 450 2017/ Max 500 4x4 (DPS/ XT)/ Max 650 XT/ Max 800R EFI XT/ Max 1000/ Max 1000 LTD 2013 2014, for more detailed models, please refer to the detailed description below. Function: The brake pads have stable and controllable braking force, and have good hydraulic transmission and heat dissipation capabilities to ensure that the force exerted by the driver from the brake pedal can be fully and effectively transmitted to the master cylinder and each sub-cylinder to avoid Hydraulic failure and brake degradation caused by high heat, whether it is muddy, snowing or entering the water, it can maintain excellent performance under any circumstances! Installation: Take off the wheel with lug nuts and remove it, fix it with tape, pull out the pin holding the brake with a small clip, pull it out with a caliper, remove the caliper with two 15mm bolts, use the brake The detergent cleaning pad is pushed into the two pistons of the two calipers at the same time, the two brake pads are installed face to face, there is enough space between the rotor and the gasket, and the calipers are reinstalled. Tool required: 17mm and 15mm Sockets, punch and hammer, pliers and C clamp, brake cleaner, tape and shop towels, packing include 6× brake pads.Note that after finishing, step on the brake several times, re-compress the piston, and check the tightening of the fixing screws. Customer Service: You will get 24-months service, hassle-free return and money back policy, buy with confidence! If you have any questions, please contact us by email, we will reply you within 12 hours.