1 " Inch Water Transfer Pump,2HP 43cc 2-Stroke Portable Gas Gasoline Engine Powered High Pressure Water Pumps Transfer for lrrigation Drain Work,60m³/h Flow - GDAE10

• EFFICIENT WATER TRANSFER WORK:1 inch water transfer pump is powered by a true commercial 2HP petrol engine. With a suction/discharge diameter of 25mm, or 1 inches, this petrol water pump has a maximum delivery lift of 30m and a maximum water displacement rate of 27,000 litre per hour. With a 1L fuel tank, this water pump is ready for up to 1 hour at 3/4 load. DURABLE MATERIALS& SAFE DESIGN:Water pump made from non-corrosive marine grade aluminum and alloy hose fittings.The engine features a durablel steel cam and crank shaft, cast iron cylinder to withstand wear. High quality carburetor to get the pump start easily and low oil alert sensor for safe operation. MAIN PARAMETERS:Engine power1.25kw/7000r/min(2hp).Air-cooled,43CC 2-stroke,single cylinder gasoline.Corresponding rationbed speed:7000rmp.Ratio of fuel and lubricant30:1.Inlet and outlet inside DI.(mm):25.4.Size of product: 36.5*32*34CM. WIDE APPLICATION:GDAE10 petrol water pump seems to be the perfect solution using in variety of locations including flower nurseries and gardens, water plants, mines, factories, ships, and villages where water needs to be drained remotely.Our petrol water pump is an ideal solution not only for emergency jobs but also for daily routine. CUSTOMER SERVICE:If you encounter any problems while using the pump, please feel free to contact the GDAE10 after-sales staff. We provide startup and operation videos to solve your troubles. When it doesn't start, try the steps I suggested: Press the Oil bubble, Then increase the throttle, Close the choke, Pulling quickly, After having a start-up reaction, Open the choke and pull it again,finally started., Weight: 12.125 pounds, Manufacturer: GDAE10