MantisTol LVP-231 8.9" Vinyl Plank Cutter for LVT, VCT, LVP, PVC, WPC, Rigid Core Vinyl Plank; - CutTool Ltd., LVP231

• Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty.No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor. It cannot cut laminate flooring and other hardwoods. 8.9" cutting width and 5/16"（8mm） cutting thickness. Translational cutting,the deep of the throat is 115mm/4.5inch. Straight cut, Angle cut, Notch cut, Rip cut, 0-45° Angle Cutting and more . Clearly marked measuring guide. Easy to use and to carry around, you will like it！ The blade of our cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular corners，most of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good tool and try it, which will save you a lot of time！ Patented product, all rights reserved ! Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank （SPC or RVP）, it is a stone-plastic composite material, which contains stone powder. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts.If you want to corner cuts it,Each cut can only cut 1/16 inch (1~2mm) thickness & approximately 4 inches cutting length, which is equal to that each cut is the upper surface of the floor. (requires some skills and control your strength)，So your floor won't crack. 2.2mm thick 9” length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet),Otherwise Otherwise, it will quickly damage the cutter. Replacement blade can be got at the online official brand store (MANTISTOL).