|
EnruigeOK OBD OBD2 Power Cable for Dash Camera 24 Hours Surveillance/Acc Mode with Switch Button, 3Pin OBDII Adapter Hardwire Charger Cable 12-26V to 5V 2.5A (Micro Curved Right Port) (1, Black) - ERG-USB
EnruigeOK ERG-USB
-
UPC
768587466083
-
【Low Voltage Protecting】OBD2 dash cam power cable which has a built-in intelligent program control chip. Accurately detect the car battery voltage, constant12V/24V voltage to 5v. When the battery voltage is lower than 11.6V, will stops working to prevent the battery from wasting power. 【2 Mode with Switch Button】Mode Surveillance, realize really 24-hour parking monitoring. Mode ACC, the obd hardwire kit will power off after 5 minutes when car turns off. The function of ACC is realized by detecting the voltage of the car. Within 5 min Since the electric quantity of the customer's car is still higher than 12.8V under flameout (our detection standard is 13V, the lowest is 12.8V), This 5 minutes is aimed at most cars in this range can be lower than 12.8V. 【 MODE1 】 PRESS THE RED BUTTON SWITCH TO" MODE -": at THIS MODE YOUR DASH CAM WILL KEEP RECORDING 24 HOURS NO MATTER YOUR CAR TURN ON OR OFF. SUITABLE for PARKING MONITOR. 【 MODE 2 】 PRESS THE RED BUTTON SWITCH TO" MODE O": THIS IS ACC MODE. at THIS MODE YOUR DASH CAMERA WILL TURN ON/ OFF WHEN YOUR CAR TURN ON/OFF. Special reminder: 【 MODE Switching 】 When switching between 【mode 1】 and 【mode 2】, the OBD adapter must be unplugged and reinserted once, otherwise the mode switching will not working. Specific steps: 1. Pull out the ODB adapter. 2. Switch to the mode that you want. 3. Reinsert the OBD adapter 【Plug and Play OBD Power Adapter】Dash cam power cable obd2 cable makes your 24-hour monitoring easier. No Wiring Fuse Operations, more convenient than all dash cam hardwire kit. Directly connect the OBD port with the dash car camera.
|