1” 4 Outlet Mini Indexing Valve with 2,3, and 4 Zone Cams #, 1004 - FIMCO MANUFACTURING INC. 9254

• UPC   186008000003
• Valve is recommended for use in an irrigation system driven by city water Indexing valve can run from 2 to 4 zones based on the chosen cam configuration Valve has 4 outlets and 1 inlet that are all slip fit for 1" pipe. Please remember that pipe size is measured by inside diameter. This valve is made to accept 1″ pipe so the outlets and inlets will be larger than the pipe size it receives. 4 Zone cam is installed but comes with 2 and 3 zone cams Indexing valve can run from 2 to 4 zones based on the chosen cam configuration 10 PSI minimum pressure rating Anti-siphon valve (not included) is recommended and may be required for safe operation of the FIMCO hydro indexing valve on a city water installation Great alternative to individual solenoid valves with one valve replacing up to 4 individual solenoid valves 1 above ground valve controls all zones eliminating the need to dig into the ground to locate electric solenoid valve boxes Only use standard clear PVC cement (not included) when installing the valve and allow the valve 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in the construction of the indexing valve, purple primer has a similar effect and should only be applied to PVC pipe and never the valve housing, Manufacturer: FIMCO MANUFACTURING INC.