FLASH HOBBY F405 Flight Controller Stack 30 x 30 FPV Controller with 60A 4 in one 3~6S Brushless ESC for Quadcopter Fixed-Wing & Drone - F405 V1

• [60A 4 in 1 ESC] Come with 60A brushless ESC, the continuous current of 4 in 1 60A ESC is 60A*4, the burst current is 65A for 5 seconds. FC stack is support shot300, 600 PWM control signal [Large Space Pads] The ESC has large space pads to the motors, which makes you solder up your motors more easily and bring a smmothly flight experience [Convenience at Night] Equipped with some pads to suport soldering up the LED strip and GPS, after you solder up them, you can fly your model at night and check where is it, which is very convenience [Connect Way] Built-in type-c socket, you can connect the flight controller stack with your computer to change the data that you want. The firmware is Betaflight Configurator and INAV [Parameter] Built with the firm STM32F405 MCU, MPU6000, Support Dshot300, 600 PWM control signal. Mounting size is 30.5 x 30.5mm and the hole diameter is 4mm, which is suitable for most models in the market
• -ESC: The continuous current of 60A 4 in 1 ESC is 65A*4, the burst current is 65A for 5 seconds. Support 3~6S lipo and Dshot300/600 PWM. -LED Light: Equipped with some pads to support soldering up the LED strip. After you solder up them, you can fly your model at night, which is very convenience. -GPS & 16M Blackbox: Equipped with a GPS pad and 16M black box, after you solder up your GPS, you can track the flight trajectory of your model and the black box will record the flight process. -Firmware: The firmware is Betaflight, INAV Configurator. You can connect the flight controller stack with your computer to adjust and observe the data that you want. -Parameter: The MCU is STM32F722RET6, IMU is MPU6000. The mounting dimension is 30.5 x 30.5mm, hole diameter is 4mm. You can according to these choose whether it fits your models or not.