GX PUMP CS4-I Portable PCP Air Compressor, 350W Powerful Motor,Max 5800Psi/40Mpa, Built-in Home Converter, Water and Fans Cooling, 5 Hours Continous Work, 12V Auto Stop Paintball Air Compressor - GX-E-CS4-I

• UPC   755642825145
• This CS4-I PCP compressor has a new upgraded 350W motor , and adopts four-stage compression technology. It is very stable when working, and it is very quiet with only 70db. Maximum filling 5800Psi/40Mpa.Notice :First confirm the maximum safe pressure of your gas cylinder, do not over-inflate, otherwise it will cause safety problems. At the same time, it is equipped with a double-pointer pressure gauge, and the two-level setting auto-stop pressure, which is more secure. A water tank and a grease tank are designed on the top of the compressor. The excellent cooling can achieve 5 hours of continuous work . Note: For the first use, it must be filled with neutral distilled water or antifreeze ( PH is about 7). Note: 1) you can only add antifreeze if it freezes in your area in winter. 2）:Do not turn the grease knob until after 6 hours of use, otherwise will cause bad performance. then turn it one turn every worked for 6 hours. 15% Faster Filling Speed: Filling 0.5L tank from 3000Psi to 4500psi ,only needs 4-5 minutes. Filling 0.5L from 0-4500psi, only needs 14-16 minutes. Notice: CS4 and CS4-I are mainly used for high pressure, small gas cylinders below 6.8L, especially PCP. It is not recommended to fill large gas cylinders. Otherwise, you can choose 5K1 and 5K2. Built-in 110v to 12V DC Converter: Compared to the GX E-CS4, the CS4-I has a built-in converter for greater convenience. You can use car battery or household outlet as power supply. The machine is also equipped with a built-in oil-water separator which never needs to be replaced, so you don't need to buy other external oil-water separators. Please read user manual carefully before turning on compressor. Quick connector : M10*1, 8MM female connector. Product size: 11.8*6.1*12.4 inch , weight: 29lb. ATTENTION: when filling is complete, please close the bottle valve first (when filling bottle) and then open compressor's bleed valve to release line pressure . All pressure must be released from compressor before starting.