PAUTIX SP901E LED Pixel SPI Signal Amplifier Repeater,PAUTIX 12mm Connectors for RGB Smart IC COB LED Strip Light,PAUTIX 65.6ft/20M Extension Cable Wire Cord,22AWG 3-pin Wire Cord

• Note: It is not a controller . It works with controller together. Can not support 4 pin or 5 pin RGB/RGBW no IC chip 5050 LED strip . This SPI signal amplifier is compatible with all kinds of 5V-TTL signal dual signals. It receives one signal and simultaneously output 4 or 8 channels of signals. Each channel can control the same quantity of LED pixels as main controller. It can output 8 channels for addressable LED strip with single data wire, such as PAUTIX RGB Smart IC COB LED , WS2812B, WS2811, SK6812RGB, SK6812-RGBW,SM16703, etc. It can output 4 channels for addressable LED strip with data & clock wires WS2801, APA102, SK9822 or dual data wires, such as WS2813, WS2815 You can use one controller to control DC5V WS2812B and DC5V WS2813 LED strip at the same time, control DC12V WS2811 / RGB Smart IC COB ,DC12V WS2815, DC12V 1903, DC12V 6803 Or DC24V RGB Smart IC COB at the same time via this singal amplifier since they have the same singal. DC5V~24V wide range of working voltage, but it cannot regulate the output voltage. That means the output voltage of power supply must be the same as the work voltage of your LED lights. The current through the amplifier is limited, when the current consumed is high, you need to add the power supply of the corresponding voltage. Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium dream color lighting projects. It can work with PAUTIX SP630E, SP530E, SP608E, SP107E etc controller.