PRIORMAN Permanent Dance Pole with Fixed Plate Dancing Pole for Home Dance Pole with Ceiling Mount and Extension Accessories More Safety and Stability (Black)

• Our fixed plate dance pole is safe for home studio use and fits ceilings from 7.3 to 9 feet with a 45mm diameter. The package includes 2 extension poles and a height adjuster, but please make sure to measure your ceiling height and choose the right size pole. If your ceiling is over 9 feet, we have 3 extension sizes available for separate purchase. The fixed plate dance pole is suitable for club, training room, home and other venues, which is more safer and stronger load-bearing capacity Prepare the installation area. Before you start mounting your pole, make sure you have enough clearance around it, a stable surface to stand on, and the necessary tools and hardware. You'll need a drill, screws, anchors, a spirit level, a measuring tape, and a ladder or stool if your ceiling is high. It's also recommended to clean the area and remove any obstacles or hazards that could interfere with your dancing. Mark and drill the holes(only the ceiling). Once you have determined the best spot for your pole, mark the points where you'll drill the holes. The holes should be evenly spaced and aligned with the center of the pole. Use a spirit level to ensure that your pole will be vertical and not tilted. Then, drill the holes with the appropriate size of the bit and insert the anchors if needed. Install the top plates. The top plates are the components that secure your pole to the ceiling and floor. Attach the top plate to the ceiling, using the screws and a wrench or pliers. Make sure the plates are tight and flush with the surface. Assemble and test the pole. Now that you have mounted the top plates, it's time to connect the pole sections and lock them in place. Follow the instructions provided by the manufacturer, then put the bottom base on the ground, and tighten the pole extension. Once you have assembled the pole, give it a gentle shake and test its stability. If it wobbles or bends, you may need to adjust the screws or pole extensions.