Battery Adapter Cable for DJI Ronin-S Gimbal DC 12V Outport to NP- DC Coupler Dummy Battery for Sony A7 A7S A7R A7S2 Camera - SZRMCC FW50

• This connection adapter cable is used to Convert voltage from DJI Ronin-S Gimbal's DC 12V voltage output port to NP-FW50 Dummy Battery output for powering Sony A7 A7S A7R A7S2 A6300 A6500 Cameras. Input: 12V, Output: DC 8.2V/2A. Plug A : DJI Ronin-S 12V 4 Pin Connector, Plug B: NP-FW50 Dummy Battery Connector. The Min length is about 12inches (30cm). The Max length is about 31.5 inches (80cm). Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
• This connection adapter cable is used to Convert voltage from USB Power Bank 5V 2A-4A voltage output port to NP-FW50 Dummy Battery output for powering Sony A3000 A5000 A5100 A7 A7S A7R A7S2 A6300 A6500 NEX Series Cameras, to shooting a long time outdoors to provide uninterrupted power supply. USB Input: 5V, 2A-4A . DC Output: 7.2V-8.0V. Featured with over-charging, short-circuit, high-temperature, and surge protection. Plug A : USB 4 Pin Male Connector, Plug B: NP-FW50 Dummy Battery Connector. The Min length is about 12inches (30cm). The Max length is about 31.5 inches (80cm). Note: Make Sure the OUTPUT of your Power Bank is 2A or More, NOT the capacity, the camera will not work properly even though the capacity of your power bank is 10000 mAh but the output is less than 2A.