Durable Steel Dethatcher Tines for Replacement GreenWorks 2500600G 27022 29272 10 Amp 14" Corded Dethatcher(18-Pack) - ZTTM

• Durable Steel Dethatcher Tines For Replacement GreenWorks 2500600G 27022 29272 10 Amp 14" Corded Dethatcher In order to change the tines, you'll need: - 8mm socket, - Phillips Screwdriver (Cordless Drill recommended), - Flat head screwdriver, - Small mallet or hammer. *be careful, the screws are not of the highest quality* if you need to change some of them, they are M5 X 22 or M5 X 25, 22 being the length under the head. [Installation Procedure]: 1) Remove the screw(s). 2) Tap gently with a mallet to crack open the tine cartridge. 3) With a flathead screwdriver, pry open until you can see the pin, don't remove the tine cartridge out of the housing. 4) push out the pin and remove the tine. 5) put a new tine in place. 6) put the tine cartridge back in place, tap gently with a mallet. Discount: 20 Packs!On the original packaging of 18 springs, 2 springs are included as replacement for wear and tear to ensure the most cost-effective option. Please make sure your original spring part number is 29272 or 27022 before bidding, otherwise it may not fit (It may look like your original ones, but it may be different on sizes)