awolsrgiop 2 Stroke 18HP Heavy Duty Outboard Motor, Short Shaft Inflatable Boat Motor 246CC Outboard Boat Motors Electric Outboard Engine Fishing Sailing Boat CDI Ignition Water Cooling System - 233

• 【Large Fuel Tank】This engine has an internal fuel tank that holds 6.34 gallons of gasoline. This engine is capable of handling rough water conditions and going long distances. Powerful motor: With a maximum output of 18 horsepower, this motor can handle rough waters and keep you safe. If you're looking to venture out on rough water, this is the ideal motor for you. The motor is suitable for rubber boats, inflatable boats, sailboats, yachts and so on. 【CDI Ignition System】The ignition system on this engine is a cdi ignition system. You can start the motor quickly and safely. It saves you time and is easy to use. Easy to use: There is a fuel hose included in the package with which you can refuel the motor. The cover of the motor has a handle with which you can easily carry the motor or open it. These thoughtful designs make the outboard motor more convenient to use. 【Streamline Design of Individual Fins】This design protects the high-speed propeller in the event of a collision with an underwater object. Ergonomic handle: This motor has an ergonomically designed handle that you can use with ease. The well-designed handle allows you to use the motor easily and avoid potential hazards. Rubber handle cover: The handle cover of this motor is made of high quality rubber, which can increase the friction and prevent your hands from slipping. 【Easy to Use】This boat motor comes with an instruction manual that you can refer to for easy use of this motor. You can also install this motor according to the instructions. Lid locking handle: There is a locking handle on the lid. If you want to check the motor, you can easily open the lid by the handle on it. Anti-vortex plate: There is an anti-vortex plate above the propeller. It keeps the water flow stable and gives you a good driving experience. 【Note】After in the seawater or turbid water cruising, please use fresh water to clean the outboard motor and cool off the water channel with fresh water. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. And make sure the gasoline and oil are well mixed, otherwise it will damage the machine. The engine should deposit in places with aridity and good ventilation. You should avoid exposing it directly to the sunshine. 【Note】The new machine has a break-in running period of 10 hours, during which the fuel ratio is gasoline 30L(7.93gal):1L(0.26gal) oil. 10 hours, the ratio is gasoline 50L(13.21gal):1L(0.26gal) oil. Before completely running out of cooling water, don't put the outboard motor outside. Otherwise, the water can pass the exhaust port to the air cylinder, which will cause the engine to break down. Before long-term storage, you should clean out the gasoline in the fuel tank completely. 【Note】When there is no water coming out from the motor, please stop using it immediately. You should check the impeller of the water pump and see if the water outlet is blocked. Start the motor in the water. Use the motor when it stops cycling water. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.