for RasPi Pi 5 PCIE to 4xGiga Ethernet HAT PCIe Adapter Boot, Driver Fr-e Plug and Play for Pi OS Expansion Board with Cooling Fan（MPRG4-H） - enttgo

• UPC   718653214643
• 1. Compatible with: MPRG4 for RasPi Pi 5 PCIE to 4xGiga Ethernet HAT PCIe Adapter Boot,for compatibility with Pi 5 Single Board Computer motherboard. Note：RPi Pi 5 Motherboard not included 2. Drive-free for official for Pi OS and Op-e-Wrt system drive fr-e technology, high-speed internet access on your for Pi 5 effortlessly. Install the driver for the for Ub*untu operating system. 3. Use PCIE to extend dry gigabit Ethernet,RTL8111H chip.Gigabit Ethernet using switch chip to achieve a four-way dry Ethernet.Power button switch,Switch on/off control directly through the PI 5 button).Network port reset button.expansion board is assembled under the PI 5 and does not occupy any peripheral ports of the PI,Includes 40pin GPIO. 4. Four-port Gigabit before the system starts, connect any network port to the upper router, PI will get IP address. The other three network ports can be assigned to other network devices and have independent IP addresses on the same network segment Address. The IP addresses of the four ports are assigned by the upper-layer router. If after a period of time after the system boot. Before connecting the network cable, PI will think that the connection times out and cannot obtain the IP address. In this case, you need to press the switch To obtain the IP address again, press the reset button.