hynade Plasma Cutter HYC550XP, Non Touch Pilot Arc Plasma Cutter,55A Dual Voltage 110V/220V Inverter Max Cut 16mm Plasma Cutting Machine (HYC550XP 110/220V) - HYC-CUT

• 👉Pilot Arc Plasma Cutter Dual Voltage 110/220V, HYC550XP is Full digital High Frequency Pilot Arc Plasma Cutter, 55Amps cutting current with 60% duty cycle, IGBT inverter digital plasma technology, 220V 55Amps 110V 35Amps Cutting Current, Max Cutting Thickness 16mm@55A 220V 70PSI, Clean cutting thickness 14mm@55A 220V 70PSI, 10mm Clean Cutting thickness under 110V 60PSI 👉Input Power AC110/220V±15%, The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V. 63A power breaker and 10 Gallon Air compressor is suggested. Machine come with 2 meters power cable with 110V power plug, NPT 1/4G quick air connector supplied with machine. 👉Digital Plasma Cutter, This cutter machine is full digital Inverter Igbt plasma cutter, with digital air gauge, post time and current display. The digital gauge will show accurate air pressure, Machine will give warning if the air pressure low or high. Also machine with error code show different problem through the code. The user can easy read the code find the problem for quick service. Fan will work only after machine getting hot and the LED will lighting up on panel. 👉Metal Suitable, This plasma cutting machine suitable to cut 16mm standard mild steel, 14mm stainless steel, 14mm Alloy steel, 2mm copper, 6mm Aluminum. All the cutting thickness under the rate 220V 55Amps 60-75PSI, The cutting result may different depend on different voltage current and air pressure. 👉Plasma cutter come with quality torch and other accessories, AG60P pilot arc cutting torch, 3 meters earth clamp, 2 meters air hose, 2 pcs hose clamp, 2 electrodes, 2 tips, 1 air regulator, 1 wire adaptor, 2 air connectors (fit at air regulator))